1. Gammacril® Round Rods

2. Gammacril® Round Rods

3. Gammacril® Square Rods

4. Gammacril® Profiles

5. Gammacril® Profiles

6. Esacril

Others:

• Esacril Shock Resistant

• Esacril Satin

• Esacast

• Esalux

Gammacril® cast acrylic round rods are turned from square to produce diameters up to 200mm. Final polishing ensures that Gammacril® round rods are supplied with a highly polished and brilliant surface, typical of cast acrylic.

Gammacril® cast acrylic round rods are turned from square to produce diameters up to 200mm. Final polishing ensures that Gammacril® round rods are supplied with a highly polished and brilliant surface, typical of cast acrylic.

Gammacril® cast acrylic round rods are turned from square to produce diameters up to 200mm. Final polishing ensures that Gammacril® round rods are supplied with a highly polished and brilliant surface, typical of cast acrylic.

Gammacril cast acrylic square rods are available up to 200mm square and are supplied with a highly polished and brilliant surface, achieved by diamond polishing and final buffing.

Gammacril® rods are also available in special profiles such as halfround, triangular, rectangular, hexagonal and octagonal in addition to spheres, cubes and discs. All Gammacril® products come with a highly polished surface as standard although can be sourced as a ground finish, where required.

Gammacril® rods are also available in special profiles such as halfround, triangular, rectangular, hexagonal and octagonal in addition to spheres, cubes and discs. All Gammacril® products come with a highly polished surface as standard although can be sourced as a ground finish, where required.

Esacril extruded acrylic tubes are available up to 300mm in diameter, the largest diameter that is available in the semi-finished product market, and with a wall thickness typically 1-6mm dependent upon diameter.

Esacril Shock Resistant is produced using a high impact grade of acrylic. This modified grade improves the impact resistance of the tube.

Cast acrylic tubes are produced in diameters up to 500mm by the centrifugation of methylmethacrylate monomer in round moulds which are finished by polishing the external surface of each tube. This method ensures an excellent optical appearance in addition to good mechanical, chemical and thermal characteristics.

Extruded polycarbonate tubes are available up to 250mm diameter for applications that require a higher impact resistance than can be achieved from acrylic. Esalux tubes benefit from being UV stabilised and have a wide service temperature from -50° to +100°C.

Esacril Satin has a fine, matt texture on the outer surface. This surface finish is primarily to help create a diffused light effect when used in lighting applications. However, it also works equally well to disguise finger marks from handling.